Description
Below are Equipment Working Range
- Blade length: 1200 mm
Welding Parameter
- Striking current: 100 A (100 %)
- Transferred arc current: 0 – 300 A (100 %)
- Powder feeder: Feed speed 6 – 30 g/min, load volume 18 kg
- Welding gun: Welding current 5 – 250 A, direct-cooling nozzle, outside powder feeding
- Center gas flow rate: 0.6 – 6 L/min
- Powder feeder gas flow rate: 0.6 – 6 L/min
- Protection gas flow rate: 1.6 – 16 L/min
- Positioning turntable: CNC motor
- Movable beam: CNC motor
- Cooling water tank: Provide constant temperature and hydraulic pressure to welding gun and turntable. Cooling ability is 6000 kcal/h. Cooling water temperature control range is +5 ℃ to +30 ℃. Control accuracy is ±1 ℃. Water tank volume is 50 L (need deionized water)
- Gas tube and water cooling cable components: 1.5 m long gas or water tube components used to connect welding gun with control cabinet
Install Requirement
Preparation below should be ready before equipment arriving:
- Power supply: one 380 VAC ± 10 %, 65 A air switch; one 380 VAC, 15 A air switch
- Gas supply: Bottled industrial pure argon with 99.99 % purity. Provide oxygen decompression valve (low pressure range 0 – 4 kg/cm2)
- Provide 50 kg deionized water
System Configuration
Main parts of machine
| NO. | Item | Component and type | Piece |
| 1 | Control cabinet | Striking power source (YC200 Panasonic), Transferred arc power source (YC400 Panasonic), PLC programmable controller, Motor Driver, D/A transform, Isolation amplifier | 1
|
| 2 | Powder feeder | KK1 | 1 |
| 3 | Welding gun | 600 | 1 |
| 4 | Remote control operating panel | Text monitor, numeric display instrument | 1 |
| 5 | Welding gun adjust system | 1 | |
| 6 | Gas tube and water cooling cable | 1 | |
| 7 | Positioning turntable | (CNC motor) | 1 |
| 8 | Movable beam | (CNC motor) | 1 |
| 9 | Water cooler | Freon refrigeration | 1 |
| 10 | Ignition box | 1 |
Reviews
There are no reviews yet.